Special offers on Milwaukee power tools, new products from Rayovac and Dottie!

Posted on April 30th, 2010 by admin

New LED flashlights from Rayovac, Dottie introduces ceiling solutions, and great prices on CRC maintenance chemicals. Special trade-in offer from Milwaukee 18v power tools. Trade in any competitor’s 18v product and get a $100 instant discount on Milwaukee 18v products until May 31, 2010. Buy any M12 tool kit from Milwaukee and get a FREE M12 Plumb Laser with this special Milwaukee Mail-In Offer. See other great promotions, special offers and more by visiting summit.com.

Duration : 0:0:32

Read the rest of this entry »

Filed under power tool | No Comments »

Tools: Air Compressors and Tanks

Posted on April 30th, 2010 by admin

Here’s a look at some vital tools to any modeler. Air compressors come in a range of capabilities. These days, they can be very reasonably priced as low as $50. At the other end, they can go over $500 in some cases. Ideally, having an air tank to supplement the compressor is a good thing. The compressor loudly fills the tank once, you drain the tank silently.

Duration : 0:5:16

Read the rest of this entry »

Filed under tools air | 2 Comments »

Wood Lathe Tips : Sharpening Wood Lathe Tools

Posted on April 30th, 2010 by admin

Sharpening wood lathe tools only requires a slow-speed wet grinder and a jig to support the tools during sharpening, and each tool is sharpened according to its shape. learn to keep tools clean and sharp with information from a woodworking craftsman in this free video on wood crafts.

Expert: Dave Trull
Contact: www.trullgallery.com/
Bio: Dave Trull has been in the woodworking business for 18 years, and he got into woodworking way back in the early ’70s.
Filmmaker: Christopher Rokosz

Duration : 0:2:8

Read the rest of this entry »

7.3 Powerstroke Diesel Injector Cups Sleeve Puller

Posted on April 30th, 2010 by admin

Whitaker Tools, Inc presents the Injector Cups Sleeve Puller and Driver Tools designed for the Ford 7.3 Powerstroke Diesel Engines. Enter code 1007 at http://www.whitakertools.com for a $10.00 discount.

Duration : 0:2:0

Read the rest of this entry »

JET Tools – Lathe Projects – Turn A Bowl – Part 1 of 3

Posted on April 30th, 2010 by admin

From the JET Shopclass Series of DVDs – Learn How To turn a bowl with your Lathe!

Duration : 0:9:27

Read the rest of this entry »

Filed under tools | 21 Comments »

OTC Tool Guy Pegisys Direct – Hit Technician 2000 BMW 528 IT 2 8 M52 Ltr P0340

Posted on April 30th, 2010 by admin

2000 BMW 528 IT 2.8L M52TU

Customer Complaint = Vehicle does not accelerate well, seems to be underpowered. Check engine light illuminated and a code P0340 (BMW 65) set

Procedure:

1. Test wiring at the sensor connector:

A. Pin 1 (Red/White wire) should have battery voltage with ignition on.

B. Pin 2 (Yellow) should have 5V from engine control module.

C. Pin 3 (Brown) is a ground.

2. As the cam turns, the 5V reference on pin 2 should switch on and off (5V square-wave digital signal).

Potential Causes:

Defective Camshaft Position Sensor (CMP)
Wiring

Confirmed Fix:

3 – Camshaft Position Sensor (CMP)
2 – Intake Camshaft Position (CMP) Sensor
1 – Crankshaft Position (CKP) Sensor

Duration : 0:2:20

Read the rest of this entry »

BOSCH AKE30 ELECTRIC CHAINSAWS 240v UK

Posted on April 30th, 2010 by admin

X Grade BOSCH AKE30 ELECTRIC CHAINSAWS just £56.75 Click here for more info: http://www.mowermagic.co.uk/acatalog/X-Grade_Bargains.html

Duration : 0:3:5

Read the rest of this entry »

GPW-510A Wet Air Edge Profiling Machine

Posted on April 30th, 2010 by admin

GPW-510A Wet Air Edge Profiling Machine

Max. Speed : 9,000 rpm
Horse Power : 2.5 HP
Weight : 14.5 kgs
Length : 420 mm
Width : 210 mm
Height : 260 mm
Air Cons. : 1.19 m3/min
Hose Size : 10 mm
Sound Pressure : 82.5 dBA
Air Pressure : 90 psi
Max. Thick Stone : 2 ~ 3 cm

1. Muffler Tube, swivel 360 to avoid tubes tangle together.
2. Rear Handle, support the machine when lift it up.
3. Regulator for adjusting height of Diamond Disc Wheel (0~35m/m)
4. Booster increases water flow pressure and strengthens floating power.
5. PTFE plates with strong air injection, which features cratch resistance, excellent floating performance, and enables smoothly movement.
6. Water feeds on slab for scouring residue of profile .
7. Fixing bolt instead of stop spanner, replace and adjust height of diamond disc easily.
8. Flexuous water hose can scour the residue on diamond disc wheel.
9. Curved Edge Profiling: enables users glide machine smoothly on rail for milling and polishing straight and curved edges.

Duration : 0:8:31

Read the rest of this entry »

Power Tool Drag Racing

Posted on April 30th, 2010 by admin

Brilliantly repurposed power tools + beer + a burning ring of fire = a good time for these power tool drag racers

Duration : 0:3:28

Read the rest of this entry »

Filed under power tools | 14 Comments »

Bovidix – Hand Tools

Posted on April 30th, 2010 by admin

BOVIDIXhttp://gdata.youtube.com/feeds/api/users/bovidixTechBovidix, Hand Tools. BoxBovidix – Hand Tools

Duration : 0:0:50

Read the rest of this entry »

Filed under hand tools | No Comments »

  • Categories

  • Pages

  • Tags

  • Archives

  • Meta

  •