Domain Tools

I am going to an automotive junkyard tomorrow. It is a pull it apart junkyard pretty much. I am looking for some OEM switches and a OEM spoiler for my car. What kind of tools should I bring along. I already have it all, but I have never been to a junkyard to know what goes on there.
Also, how much time would I need in a junkyard? Like should I get there early to look for parts?

Bring a tire iron and if you could get it through the door aa golf club and have fun busting out windows.

Stupid questions get stupider answers.

The OBD 2 code P0401 low flow EGR on Honda’s is sometimes caused by the EGR passage restricted with carbon build up. The V-6 2003 Honda Accord in this video has a removable passage just under the upper intake cover. Remove two 10 mm bolts, remove the clean the carbon out of the EGR cross over passage and re-install. Clear the code with a code reader or scan tool. For automotive tech training articles and auto tools visit http://www.denlorstools.com/home/dt1/smartlist_503/tech_articles.html

Duration : 0:0:39

Read the rest of this entry »

2006 Nissan Altima Base 2.5L

Customer Complaint = Idle speed is incorrect, check engine light is on and code P0507 is set

Procedure:

1. Perform the Accelerator Pedal Released Position Learning procedure.

2. Perform the Throttle Valve Closed Position Learning procedure.

3. Perform the Idle Air Volume Learning procedure. Follow TSB# NTB05-067 and disconnect one or more fuel injectors as necessary to bring the RPM down and perform the Idle Air Volume Learning procedure.

4. If the idle will not relearn, it may be necessary to bring the vehicle to the dealer to have the factory scan tool, try going through the relearn procedures.

5. If the problem still occurs, the vehicle may require throttle body replacement.

Potential Causes:

Accelerator Pedal Released Position Learning
Idle Air Volume Learning Procedure
Throttle Body
Throttle Valve Control Module — Throttle valve closed position learning.

Confirmed Fix:

13 – Idle Air Volume Learning Procedure
10 – Idle Air Relearn Procedure
7 – Throttle Body
6 – Idle
3 – Accelerator Pedal Released Position Learning
3 – Idle Relearn Procedure, Throttle Body
2 – Engine Vacuum
2 – Idle Relearn Procedure
2 – Throttle Adaptation
1 – Electronic Throttle Body, Powertrain Control Module (PCM)
1 – Engine Control Module (ECM), Idle Relearn Procedure
1 – Positive Crankcase Ventilation (PCV) Valve
1 – Relearn Procedure
1 – Throttle Angle

Duration : 0:3:2

Read the rest of this entry »

I am going to an automotive junkyard tomorrow. Never been to one. What should I know before going to one? It is a pull it apart junkyard pretty much. I am looking for some OEM switches and a OEM spoiler for my car. What kind of tools should I bring along. I already have it all, but I have never been to a junkyard to know what goes on there. Also, how much time would I need in a junkyard? Like should I get there early to look for parts?

Ideally you want a small box with all your basic tools.At least you want a couple pairs of pliers flathead phillips and a hammer throw a ratchet in your pocket with popular size sockets maybe like an 8 to a 13 with what you’re going for.Really helps if you know what you need to pull a particular part ahead of time.No particular time to go plan on being there an hour or two to locate and remove what You need

Vehicle misfires, does not acellerate well, seem to be underpowered, loss of power, low power.

Duration : 0:2:15

Read the rest of this entry »

http://www.denlorstools.com/home/dt1/page_34983_137/aultel_aulolr__oil_light__airbag_reset_tool_oil_li.html Autel oil change and SRS (airbag) reset tool (1.0) has gotten a lot of interest at DenLors Tools. We have had many customers calling us to find out more information particularly about the vehicle coverage. Rather than trying to put all of the information in writing, We have put the manufacturer’s “users manual” in this short video. Feel free to make it full screen and pause if necessary for better viewing. Thanks. We hope to do business with you soon.

Duration : 0:2:10

Read the rest of this entry »

2003 Dodge Ram 1500 4×4 5.9L

Customer Complaint = Check engine light On, Vehicle does not shift properly, code P1762 stored in memory

Procedure:

1. Check the voltage of the governor pressure sensor with the Key On Engine Off (KOEO). It should be about 0.5 volts.

2. If higher than 0.8 volts, check the transmission temperature sensor reading.

3. If it is not accurate, check the sensor ground to the governor pressure/transmission temperature sensor.

4. If the transmission temperature sensor is reading correctly, replace the governor pressure sensor.

Potential Causes:

Evaporative Line
Gas Cap
Purge Solenoid
Vent Control Solenoid

Confirmed Fix:

1 – Governor Pressure Sensor
1 – Transmission
1 – Transmission Fluid

Duration : 0:2:6

Read the rest of this entry »

EFIChip is a range of automotive diagnostic, scanning and code reading equipment under the Radiolinija Ltd product umbrella. Our company developing diagnostic solutions for the most worldwide vehicle manufactures, as well as distributes such diagnostic solutions. Here we provide a comprehensive and user-friendly equipment that brings the power of fast and accurate diagnostics back into the hands of the consumer.

Duration : 0:1:52

Read the rest of this entry »

2003 Honda Accord DX 2.4L

Customer Complaint = ABS light is on after repairing wheel bearings

Procedure:

1. Check the wheel bearing, it has a Brown dust shield behind the dust shield is the encoder, and the Brown dust shield should go to the inside of the knuckle.

2. If installed backwards, it will set this code.

Potential Causes:

Improperly Installed Bearing

Confirmed Fix:

Improperly Installed Wheel Bearing

Duration : 0:1:42

Read the rest of this entry »

The new video based inspection scope is a great specialty tool for automotive and home inspections used by auto technicians, mechanics, plumbers, electricians, professional home inspectors etc. more information available at DenLorsTools.com.
http://www.denlorstools.com/home/dt1/page_13223_507/visual_optics_vs36_10ww_vo_scope_inspection_stik_f.html

Duration : 0:1:9

Read the rest of this entry »