Domain Tools

RAD 2000 Pneumatic Nutrunner Torque Gun Torquing Up Rear Dump Truck Wheels on a Caterpiller 793c Dump Truck . Pneumatic Torque Multiplier

Duration : 0:4:5

Read the rest of this entry »

QUALITY PROFESSIONAL DR BRAND AIR TOOLS MADE BY GREEN KENT INC.

VISIT WWW.DRAIRTOOLS.COM FOR MORE INFORMATION!

Duration : 0:3:39

Read the rest of this entry »

Rad Torque multipliers use shop air to torque and undo bolts. This tool is a RAD -50. 1-1/2″ drive and 5,000 Ft Lbs. Availible from TJ tools. Being used on Track bolts Catapiller D-11 and Komatsu 475 bolts

Duration : 0:3:5

Read the rest of this entry »

This video shows the AP7865 in use, pressing lower ball joints in a 2000 Ford Ranger, the set comes with adapters for four wheel drives (AP 7865). Find all types of auto tools and automotive repair equipment including this ball joint press, visit http://www.denlorstools.com/home/dt1/smartlist_517/automotive_brakes_steering_suspension_tools.html

Duration : 0:0:59

Read the rest of this entry »

FEATURES OF THE DS1000:
• Forged and hardened steel crimping head is specially designed to roll the steel flanges over with a minimum of physical effort, and leaves the flange smooth without unsightly ripples.
• Design allows tool to maneuver around inner and outer curves as well as most body design features.
• Close tolerance design and manufacturing, results in a tool that is incredibly smooth, quiet, and easy to use.
BENEFITS TO TECHNICIANS: • Drastic reduction in the time required to install a door skin. As much as an hour or more can be expected improving your bottom line in a commission or rate environment.
• One handed operation to allow for free hand to manipulate the work piece.
• Variable flange thickness adjustment allows for accurate dispersement of panel adhesive in the crimped area resulting in a smooth glue bead.
• Drastic improvement in the quality of the finished product. The finished crimp typically is indistinguishable from a factory crimp.
• Save significant time and cost in skinning doors
• Faster than any other method
• Factory like results in one pass
• One hand operation

Duration : 0:2:36

Read the rest of this entry »

This on/off, two way valve air switch is designed to turn pneumatic tools on or off without having to turn the compressor on and off. Simply install the switch in front of your pneumatic tool – 1/8″ i.d. barbs are provided – and you have a simple way to turn the air pressure on or off.

Duration : 0:2:45

Read the rest of this entry »

http://www.denlorstools.com/autoblog/ DenLorsTools.com has air impact guns / wrenches for auto repair and industrial use, brands include Ingersoll Rand, Chicago Pneumatic, Sunex, SK and more auto tools and automotive shop equipment, visit http://www.denlorstools.com/

Duration : 0:0:43

Read the rest of this entry »

GPW-227 Wet Air Cutting Saw
Blade Dia. : 4″
Saw Blade Drill Dia. : 20 mm
Max. Cutting Depth : 0~30 mm
Max Speed : 7,000 rpm
Net Weight : 2.92 kgs
Length : 330 mm
Air Cons. : 0.62 m3/min

Duration : 0:3:42

Read the rest of this entry »

Duration : 0:5:24

Read the rest of this entry »

Pneumatic Hog ring tool uses 1/2′” hog rings. Hog rings can be stainless or galvanized. Less expensive than similar hog ring or c-ring tools. Available through Chesapeake Bay Oyster Company www.bayoyster.com

Duration : 0:0:36

Read the rest of this entry »